Difference between revisions of "Use cpufrequtils to Adjust Processor Settings"
(2 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | |||
+ | '''Note:''' This does not work on odroids with 3.8.x kernel, per [http://forum.odroid.com/viewtopic.php?f=22&t=1593 Link to HK forum topic] | ||
+ | |||
This tutorial is for odroid users running Debian-based distros, including Ubuntu. | This tutorial is for odroid users running Debian-based distros, including Ubuntu. | ||
The Samsung Exynos 4412 SoC is intended for mobile devices, such as tablets and smartphones. To save power and heat. It shuts down CPUs as needed and throttles back their speed to save battery life. You can elect to change how your board works -- without rebuilding the kernel. | The Samsung Exynos 4412 SoC is intended for mobile devices, such as tablets and smartphones. To save power and heat. It shuts down CPUs as needed and throttles back their speed to save battery life. You can elect to change how your board works -- without rebuilding the kernel. | ||
− | Get a terminal session as root. Then install cpufrequtils | + | Get a terminal session as root. Then install cpufrequtils: |
<pre> | <pre> | ||
apt-get install cpufrequtils | apt-get install cpufrequtils | ||
</pre> | </pre> | ||
− | + | Here is a nice writeup on usage notes: [http://www.thinkwiki.org/wiki/How_to_use_cpufrequtils http://www.thinkwiki.org/wiki/How_to_use_cpufrequtils] | |
Use the cpufreq-info command to get information: | Use the cpufreq-info command to get information: | ||
Line 34: | Line 37: | ||
cpufreq-set -g performance | cpufreq-set -g performance | ||
</pre> | </pre> | ||
+ | |||
+ | === Overclocking === | ||
+ | Default max clock was set to 1.7Ghz in the latest release. The max frequency can be adjusted to one of the following: [ | ||
+ | 2000000 | 1920000 | 1800000 | 1704000 ]. 1704000 is the default. | ||
+ | |||
+ | Set the value like this: (for example 1.9GHz) | ||
+ | <pre> | ||
+ | echo 1920000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq | ||
+ | |||
+ | </pre> | ||
+ | You may need a cooling fan for this overclocking. |
Latest revision as of 11:24, 25 June 2013
Note: This does not work on odroids with 3.8.x kernel, per Link to HK forum topic
This tutorial is for odroid users running Debian-based distros, including Ubuntu.
The Samsung Exynos 4412 SoC is intended for mobile devices, such as tablets and smartphones. To save power and heat. It shuts down CPUs as needed and throttles back their speed to save battery life. You can elect to change how your board works -- without rebuilding the kernel.
Get a terminal session as root. Then install cpufrequtils:
apt-get install cpufrequtils
Here is a nice writeup on usage notes: http://www.thinkwiki.org/wiki/How_to_use_cpufrequtils
Use the cpufreq-info command to get information:
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: exynos_cpufreq CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 11.0 us. hardware limits: 200 MHz - 2.00 GHz available frequency steps: 2.00 GHz, 1.92 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 80z available cpufreq governors: userspace, powersave, conservative, ondemand, performance current policy: frequency should be within 200 MHz and 1.60 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 200 MHz (asserted by call to hardware). cpufreq stats: 2.00 GHz:0.00%, 1.92 GHz:0.00%, 1.80 GHz:0.00%, 1.70 GHz:0.00%, 1.60 GHz:99.54%, 1.50 GHz:0.00%, 1.40 GHz:0.00%, 1.30 GHz:0.00%, 1.20)
You can turn on the performance governor like this:
cpufreq-set -g performance
Overclocking
Default max clock was set to 1.7Ghz in the latest release. The max frequency can be adjusted to one of the following: [ 2000000 | 1920000 | 1800000 | 1704000 ]. 1704000 is the default.
Set the value like this: (for example 1.9GHz)
echo 1920000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
You may need a cooling fan for this overclocking.