Difference between revisions of "Use cpufrequtils to Adjust Processor Settings"
From odroid US
(Created page with "This tutorial is for odroid users running Debian-based distros, including Ubuntu. The Samsung Exynos 4412 SoC is intended for mobile devices, such as tablets and smartphones....") |
|||
Line 8: | Line 8: | ||
</pre> | </pre> | ||
− | Link to usage notes: [http://www.thinkwiki.org/wiki/How_to_use_cpufrequtils] | + | Link to usage notes: [http://www.thinkwiki.org/wiki/How_to_use_cpufrequtils http://www.thinkwiki.org/wiki/How_to_use_cpufrequtils] |
Use the cpufreq-info command to get information: | Use the cpufreq-info command to get information: |
Revision as of 21:31, 13 February 2013
This tutorial is for odroid users running Debian-based distros, including Ubuntu.
The Samsung Exynos 4412 SoC is intended for mobile devices, such as tablets and smartphones. To save power and heat. It shuts down CPUs as needed and throttles back their speed to save battery life. You can elect to change how your board works -- without rebuilding the kernel.
Get a terminal session as root. Then install cpufrequtils
apt-get install cpufrequtils
Link to usage notes: http://www.thinkwiki.org/wiki/How_to_use_cpufrequtils
Use the cpufreq-info command to get information:
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: exynos_cpufreq CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 11.0 us. hardware limits: 200 MHz - 2.00 GHz available frequency steps: 2.00 GHz, 1.92 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 80z available cpufreq governors: userspace, powersave, conservative, ondemand, performance current policy: frequency should be within 200 MHz and 1.60 GHz. The governor "ondemand" may decide which speed to use within this range. current CPU frequency is 200 MHz (asserted by call to hardware). cpufreq stats: 2.00 GHz:0.00%, 1.92 GHz:0.00%, 1.80 GHz:0.00%, 1.70 GHz:0.00%, 1.60 GHz:99.54%, 1.50 GHz:0.00%, 1.40 GHz:0.00%, 1.30 GHz:0.00%, 1.20)
You can turn on the performance governor like this:
cpufreq-set -g performance